JL Audio VX600/2i
2-channel car amplifier with digital signal processing — 180 watts RMS x 2
GENERAL FEATURES:
Amplifier with DSP
JL Audio's VXi Series amplifiers combine JL Audio's latest amplifier technology with awesome signal processing. JL Audio teamed up with AKM™ to create this customized processor-amp hybrid. They also improved the amp's Class D performance by shortening the signal path, placing the output capacitor banks closer to the outputs, and using DirectFET® MOSFET output devices, resulting in higher efficiency, and audio quality.
75 watts RMS, two channels
The VX600/2i 2-channel amplifier kicks out 180 watts RMS per channel and features 4 channels of digital signal processing. It can power a couple speakers and add a processed signal for a separate subwoofer amplifier. You could also use this amplifier in bridged, one-channel mode and power a subwoofer with up to 600 watts RMS!
Digital precision
The 24-bit 96 kHz processing for each channel includes signal routing and mixing, 10-band parametric EQ, time-alignment, Low-pass and high-pass filters, and output level control with 0.1 dB precision. In addition to tuning the audio signal, the processor provides a master clock signal for the Class D amplification.
Remote control
You make all your settings and adjustments from your compatible device running JL Audio's TüN™ software.
Features
2-channel car amplifier
Class D amplifier design with NexD2™ switching amp technology
180 watts RMS x 2 at 4 ohms (300 watts RMS x 2 at 2 ohms)
600 watts RMS x 1 bridged at 4 ohms
24-bit 96 kHz digital processing
DSP adjustments and settings made with JL Audio's TüN app (PC and Mac) via USB, via Bluetooth (tablets and phones) with BTC Bluetooth option
3 Project Levels of tuning: Basic, Advanced, Expert
input routing and mixing
adjustable gain controls with clip indication
fully adjustable high-pass, low-pass, and bandpass filters
selectable filter slopes (6, 12, 18, 24, 30, 36, 42, 48 dB/octave)
10-band EQ (graphic in Basic, parametric in Advanced and Expert modes)
phase and polarity control
time alignment in 0.01 ms (1/8") increments
differential-balanced inputs eliminate noise coming from your vehicle's electrical system
preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)
high-level inputs — up to 16 volts RMS (about 60 watts)
DC offset or signal sensing auto turn-on eliminates need for remote lead
2-channel digital input and output (S/PDIF: up to 24-bit 192 kHz in, 24-bit 96 kHz out)
2-channel analog preamp output (4V RMS)
JLid™ connections for optional Network Hub, Bluetooth Communicator, and Digital Remote Control
USB connection for device running TüN app (6-foot cable included)
wiring, fuse, and hardware not included with amplifier
4-gauge power and ground leads and a 50-amp fuse recommended
9-13/16"W x 2-1/8"H x 6-3/4"D